Last call return (lcr) (sylantro servers only), How it works, Configuring last call return – Aastra Telecom SIP 480I User Manual
Page 170: Last call return (lcr) (sylantro servers only) -58, Last call return (lcr) (sylantro, Servers only), Operational features
Operational Features
5-58
41-001129-00 Rev 09, Release 1.4.1
IP Phone Administrator Guide
Operational Features
Last Call Return (lcr) (Sylantro Servers only)
Last call return (lcr) allows an administrator or user to
configure a "last call
return" function on a softkey or programmable key. This feature is for
Sylantro servers only.
You can configure the “lcr” softkey feature via the configuration files or the
Aastra Web UI.
How it works
If
you configure "lcr" on a softkey or programmable key, and a call comes
into your phone, after you are finished with the call and hangup, you can
press the key configured
for “lcr” and the phone dials the last call you received.
When you configure an “lcr” softkey, the label “LCR” displays next to that
softkey on the IP phone. When the Sylantro server detects an “lcr” request, it
translates this request and routes the call to the last caller.
Configuring Last Call Return
Use the following procedures to configure LCR on the IP phones.
5
Enter the extension number where the call was parked.
6
Press the "Pickup" softkey.
If the call pick up is successful, you are connected with the parked call.
Configuration Files
For specific last call return (lcr) parameters you can set in the configuration files, see Appendix A, the
section,
“Softkey/Programmable Key Parameters”
on
IP Phone UI
Step Action