PASCO SPARK Science Learning System Ver. 1.4.0 User's Guide - Manual (Page 64)

6 Image capture
Switching between live and captured camera images
A live image must be showing before you can capture a still image. When a live image is show-
ing, the button is orange.
3. Touch the Capture button to capture a still image.
The live image is replaced by the captured still image.
Switching between live and captured camera images
l
To switch from a captured still image back to a live image:
1. Touch the Image Tools button to open the tool palette.
2. Touch the blue Live Image button in the tool palette.
The still image is replaced with a live image.
l
To switch from a live image to a previously captured still image:
3. Touch the image legend.
012-10616E 55