PASCO SPARK Science Learning System Ver. 1.4.0 User's Guide - Manual (Page 118)

13 Managing the SLS device
Turning off the SPARK Science Learning System
13 Managing the SLS device
l
Updating the SPARK Science Learning System
l
Charging the battery
l
How battery status is indicated
l
Setting the date and time
l
About sleep modes
l
Customizing sleep modes
l
Adjusting the screen brightness
l
Calibrating the touch-screen
l
Product End of Life Disposal Instructions
l
SPARK Battery Replacement and Disposal Instructions
Turning off the SPARK Science Learning System
Press and hold the power button on the bottom of the SPARK.
Updating the SPARK Science Learning System
1. Check the firmware version installed on the SPARK:
a. Touch the Date/Time/Battery icon to open the Device Tools screen.
b. Touch About SPARK.
2. Visit www.pasco.com/spark to check for the latest update.
3. Follow the instructions on the website to download and install the update.
4. Also check for the latest version of this user's guide on the website.
Charging the battery
1. Connect the SPARK SLS to the AC Adapter.
012-10616E 109