beautypg.com

PASCO SPARK Science Learning System Ver. 1.4.0 User's Guide User Manual

Page 24

background image

3   Setting up an experiment

Using sensor adapters

connected to a PASPORT interface and used with SPARK SLS.

Complete these steps to connect and configure a sensor with an Analog Adapter:

1. Connect the Analog Adapter to your PASPORT interface.
2. Connect an analog sensor to the adapter. A list of sensors appears.
3. Touch one of the sensors to select it and touch OK.

You may need to touch the arrows to scroll the list.

4. Optionally, touch the Gain: box and touch a gain setting.
5. Touch OK again.

012-10616E

15