Micromod MOD: 30ML Display Script Guide - Manual (Page 29)

MOD 30ML Display Guide
Display Basics
2 -23
Figure 2 .17.
Totalizer Display for
Exercise …
Exercise:
Cont’d
Action
Comment
7. From the System menu, place a DISP
block in the strategy.
8. Double-click to open the DISP block
9. In the Name field type a name such as
DispTOT
This identifies this block within the
database. It is NOT the display name.
10. In the Description field type:
Display total steam flow
This description is assigned by the user
11. In the Display Tag field type STM TOT
12. Type DISPTAG in the Line 1 Initial Value
field
In order to use STM TOT as the tag name in
the operating display, it has to be positioned
in the Line 1 field. Using the default,
DISPTAG, will cause whatever is typed into
the Display Tag field to appear on Line 1.
13. In the second blank column of Line 2,
type Total
This is the name that will be given to Input 1
when inputs are defined. When the
operating display appears, the value of
Input 1, or Total, will be shown on Line 2.