Micromod MOD: 30ML Display Script Guide - Manual (Page 16)

MOD 30ML Display Guide
Display Basics
2 -10
2.3.2 State Table Block
The State Table (ST) block is placed in the strategy automatically by Visual Application
Designer. There is only one ST block per controller. Its sole function is to provide text
that corresponds to codes in the controller, such as Auto/Manual, Local/Remote, etc.
Associated with the State Table block is a file that contains the State Tables: one or more
‘tables’, each identified by a 1 – 8 character name, that contain a list of attribute values
and the associated mnemonic (text) strings to be displayed for each value. A default State
Table file is supplied in ViZapp for a standard P,I,D controller display. This may be used
as a starting point for adding sequence text, device display text, or key assignment text;
or, you may create your own.
Figure 2 .6.
State Table Block
The State Table names are entered in the Display Format section of the Display Block
when the user wants to associate the text with the input.
2.3.3 Display Interface Block
Like the State Table block, the Display Interface Block (DIF) is placed in the strategy
automatically by ViZapp when you begin a MOD 30ML configuration. There is only one
DIF block per controller. Its primary functions are: