Micromod MOD: 30ML Display Script Guide - Manual (Page 14)

MOD 30ML Display Guide
Display Basics
2 -8
Figure 2 .4.
Typical PID Loop
display
Although it is most common to use one display for one algorithm block (e.g. PID block),
it is possible to combine attributes from several algorithm blocks into one display, or have
multiple display blocks for a single algorithm block.
The steps involved in creating a display are:
1. Determine the variables to be displayed and the format in which they will appear,
using “Edit Inputs”.
2. Set up the formats to be used by the inputs using the “Edit Display Formats” menu
3. Fill in the menu fields for the lines and bars on the display
4. If more advanced displays are required, create the script file using the “Edit Display
Scripts” button or by creating an external script file. Display Scripts are discussed in
detail in Chapter 3.