Micromod Micro-DCI: 53IT5100A Indicator/Totalizer - Manual (Page 47)

Table 4-3. Analog Input (ANI) Module
Purpose: This module is used to configure input voltage characteristics (e.g., input voltage
range), and how the input signals are interpreted (linear or square root representation).
Title Symbol ANI Data-
point
De-
fault
Attribute
Calibrate
Span CIS0
CIS1
CIS2
CIS3 ANI0
ANI1
ANI2
ANI3 C296
C297
C298
C299 This is the calibration span adjustment. This
parameter is factory set and should not
need adjustment under normal operation.
See Section 5.3 for adjustment.
Tag Name AITAG0
AITAG1
AITAG2
AITAG3 ANI0
ANI1
ANI2
ANI3 A224
A225
A226
A227 ANI-0
ANI-1
ANI-2
ANI-3 It is an assignable 10 character name for the
analog input (ANI-0, ANI-1, ANI-2, ANI-3).
Engineering
Units AIEU0
AIEU1
AIEU2
AIEU3 ANI0
ANI1
ANI2
ANI3 A298
A299
A300
A301 PER-
CENT
(ALL) It is assignable for units of measure the ANI
represents (e.g., GPM for gallons/minute).
WD = Watchdog
Figure 4-1. ANI0-3 Figure 4-2. ANO0
Note: These figures are graphical representations of the signal conditioning that occurs on the in-
strument main board. They are provided for reference purposes only.
53IT5100 Indicator/Totalizer
4-4