Luminex 100 IS User Manual, Version 2.3 - Manual (Page 97)

x
MAP Technology Using Luminex 100 IS 2.3 Software
PN 89-00002-00-071 Rev. C 5 - 55
If all patient IDs in the batch are identified, the system appends
the patient list items to the first empty location following the
batch’s last command list activity. See “Add a Patient List” on
page 5-62 for information regarding the patient file format.
12. Verify the dilution factor settings, and adjust as necessary. See
page 5-64 for more information.
13. Select Save and Load (default) or Save Only.
14. Click Finish. If you selected Save and Load, the Run Batch tab
opens displaying the batch, including the samples you added. If
you selected Save Only, the system becomes idle as it waits for
you to initiate a command.
15. If you selected Save and Load, load the plate using the Eject/
Retract button, then click Start Plate.
Open a Batch Use this procedure to open an existing batch. The batch name and
description appear on the Run Batch tab when you load the batch.
You can open “Saved Only” batches with this procedure.
‹
To open a saved batch for an acquisition:
1. Click Open Batch. The Open Batch dialog box opens.
2. Double-click on the desired batch. The system loads the batch as
you created it in the Run Batch tab.
3. Click Start Plate to initiate batch acquisition.
Copying and
Exporting Batch
Data
‹
To export Batch Data:
Right-click in the Batch Data area of the Acquisition Detail tab.
In the right-click menu, click Copy to copy the currently
displayed data to the clipboard. Click Export to manually export
the currently loaded batch to the appropriate Output.csv file.
Clear a Batch from
the System
The Clear Batch command clears the entire batch from the Run
Batch tab or the Message Log on the Diagnostic tab. Once you
choose to clear the batch and verify that you want to continue with
the command, you can recover the cleared batch if it has not been run
by clicking Open Batch.
‹
To clear a batch from the system:
1. Right-click on the area to clear.