Maintenance tab, Maintenance tab -8 – Luminex 100 IS User Manual, Version 2.3 User Manual

Page 50

Text mode
Original mode

Luminex 100 IS User Manual Version 2.3

MAP Technology

5 - 8

PN 89-00002-00-071 Rev. C

Maintenance Tab

Use the Maintenance tab to perform maintenance, XYP, daily startup,
calibration, and verification commands to maintain your system and
keep it in optimal working order.

Figure 5-7. Maintenance Tab

See the Commands section starting on page 5-31 for detailed
information about these commands:

• Warmup

• Prime

• Backflush

• Alcohol Flush

• Sanitize

• Wash

• Drain

• Soak

• Self Diagnostics

• Calibration Commands: CAL 1, CAL2, CON 1, CON2, New

CAL target and New CON target

• Sample Probe Down

• Eject/Retract