Luminex 100 IS Version 2.1 - Manual (Page 50)

Luminex 100 IS Developer Guide to xMAP Technology Version 2.1 x MAP Technology
44 PN 89-00002-00-062 Rev. A
‹ To create a template for Data Collection Only:
1. Click the Create Template button on the toolbar. The Template
Setup Wizard dialog box appears:
Figure 28. Selecting Data Collection Only
2. Fill in the general information about your company, the author of
the template, the name and version for the template you are
creating, and a brief description. The version number of the
template is very important because it is automatically included in
the template name that the lab personnel sees when they select
the template to use with a kit.
3. Select Data Collection Only for the template type.
4. Enter the Sample Vol (µL) for this template. This is the amount
of sample that will be tested. The volume in the wells must be at
least 25 µL greater than the sample volume.
5. Enter a Sample Timeout (sec) for this template. This is the
maximum time in seconds that the analyzer will spend acquiring
each sample.
6. Enter the Low Limit and High Limit for the doublet
discriminator gate.
7. Click Next. The next Template Setup Wizard dialog box
appears:
Select Data Collection Only