4 accessories parts list – Controlled Products Systems Group 1603-080 User Manual
Page 37

1603-065-T-4-13
35
9.4 Accessories Parts List
The following accessories are available for the 1603 barrier gate operator.
Loop Detector
- Plug directly into ports on circuit board simplifying wiring.
P/N 9410-010 - Single channel detector.
P/N 9409-010 - Two channel detector.
Loop Wire
- XLPE insulation is available in 500 and 1000 foot rolls, available in Black, Blue and Red insulation.
Loop Sealant
- P/N 2600-771 Asphalt, P/N 2600-772 Concrete
Meg Ohm Meter
- Checks the integrity of ground loops. P/N 9401-045
Reverse Edge
- Installs on the bottom of the aluminum arm. P/N 8080-016 - 6 ft. Available from DoorKing to fit all arm lengths.
Photo Cell
- Prevents arm from lowering on vehicles or pedestrians. P/N 8080-018
Time Clock
- 7 and 365 day clocks, used to automatically open gate at pre-set time, fits inside operator.
P/N 2600-791 7 day clock
P/N 2600-795 365 day clock
Surge Devices
- Helps prevent circuit board failure caused by lightning strikes and power surges.
P/N 1879-080 - High Voltage
P/N 1878-010 - Low Voltage
Replacement Battery
- Convenience open system. P/N 1801-009 (2 required)
Speed Bump
- Prefabricated 6-foot speed bump reduces traffic speed through gate system. P/N 1610-150
Heater Kit
- Thermostatically controlled heater for cold weather areas. 115 VAC - P/N 1601-092
Fan Kit
- Thermostatically controlled fan for hot humid environments. P/N 1601-093
Manual Gate Control Toggle
- Allows user to manually operate gate arm. Fits inside single-gang electrical box. P/N 1200-017
Interconnection Cable
- Interconnection cable contains all the necessary wires to interconnect primary / secondary operators.
Cable length: 30 ft. - P/N 2600-755 40 ft. - P/N 2600-756 50 ft. - P/N 2600-757
High Voltage Kit
- Alter the input AC voltage on a 115 VAC 1603 to 208, 230, 460 or 575 VAC. P/N 2600-266
Gate Tracker™
- Optional control board allows the barrier gate operator to report activity to a companion 1833, 1835, 1837 or
1838 access control system.
Auto Spike System Parts
Extension Section - 3 Ft extension shaft, tunnel plate and ramp. P/N 1603-166
Spike Section - 3 Ft spike shaft, tunnel plate and ramp. P/N 1603-163
End Cap - P/N 1610-240
Aluminum Arm Only
- 14-foot replacement aluminum arm. P/N 1601-571
Aluminum Folding Arm Kit
- Low headroom applications (Arm included). P/N 1601-610
Aluminum Arm Mounting Kit
- Aluminum mounting bracket, hub and mounting hardware. P/N 1601-242
Arm Padding
- Foam padding for the aluminum or wood arm. P/N 1601-211
Lighted Auto Spike Warning Sign
- Backlit spike warning sign with adjustable light for spike illumination. P/N 1615-081
Traffic Light (Red, Green)
- Manage the traffic flow with red-green lights. Bolts onto the 1603 operator. P/N 1603-210