CTI Products RCD Standard - Remote Comparator Display - Manual (Page 55)

MCN Remote Comparator Display Running the MCN Comparator Display
CTI Products, Inc. (MCNRCD) Program
68-10856-210
49
The first is Error logging, which is used to log only failure information. This
information can be logged to the screen, the disk or both. The Show Errors On
Screen [ ] box enables the program’s status line to display the error message
received.
The second type of logging is Statistics logging, which is used to log all changes
from all Comparator I/O modules. This information can only be logged to the
disk. When statistics logging is enabled, any modules errors that occur (modules
falling off-line, etc.) are displayed on the screen as well as being logged to the file.
Only one of the two types of logging (Statistical or Error) may be enabled at a
time. The type of logging desired is selected from the Logging Options menu of
MCNRCD, as shown in Figure 28.
Logging Options selections are saved in the MCNRCD.INI file, so they take
effect each time you restart the MCNRCD program.
Figure 28 - Logging Options Dialog Box