BEI Sensors THK4 - Manual (Page 55)

www.beisensors.com page 55/57
F
FAQ Frequently Asked Questions
FC Function code. Determines the type of message sent via the CAN network.
L
Line terminator Resistor terminating the main segments of the bus.
LMT Network management object. This is used to configure the parameters of each layer
in the CAN. Master "Active" device within the network, that can send data without
having received a request. It controls data exchange and communication
management.
N
NMT Network management object. This is responsible for managing the execution,
configuration and errors in a CAN network.
NN Node number
P
PCV Process Value
PDO Communication object, with a high priority for sending process data.
PV Preset Value: Configuration value
R
RO Read Only: Parameter that is only accessible in read mode.
ROMAP Read Only MAPable: Parameter that can be polled by the PDO.
RW Read/Write: Parameter that can be accessed in read or write mode.
S