BEI Sensors CHU9 Absolute Hollow Shaft Encoder - Manual

CHU9
SSI ABSOLUTE SINGLE TURN ENCODERS, CHU9 RANGE
CHU9, 90mm SSI absolute single turn encoders :
 Especially designed for heavy-duty (steel, paper, wood – mills, cranes …) Compact and
robust conception. Excellent resistance to shocks/vibrations and to high axial/radial
loads.
 Through hollow shaft 30mm, reduction hubs available from 10 to 28mm
 High protection level IP65.
 High performances in temperature –20°C to 90°C.
 Universal power supply from 5 to 30 Vdc – SSI output.
 High resolutions possibility, up to 16 bits (Gray or binary).
 Standard DIRECTION and RESET input.
 Double/triple mounting in combinations of incremental, absolute, analogue signals.
 Digital or sine incremental outputs option.
CHU9_25 connection S6R (radial M23), with reduction hub 9418/I25 (25mm) mounted on the shaft
MECHANICAL CHARACTERISTICS
Material
Stainless steel option Cover : zinc alloy Vibrations (EN60068.2.6)  200m.s -2 (10 … 1 000Hz)
Body : aluminium EMC EN 61000-6-4, EN 61000-6-2
Shaft Stainless steel Isolation 1000 Veff
Bearings 6807 serie
Encoder weight (approx.)
0,700kg zinc alloy cover, alu body
Maximum loads
Axial : 50 N 1,000kg zinc alloy cover, stainless steel body
Radial : 80 N 1,200kg stainless steel cover and body
Shaft inertia  55.10 -6 kg.m 2 Operating temperature - 20 ... + 90 °C (encoder T°)
Torque  25.10 -3 N.m Storage temperature - 40 ... + 100 °C
Permissible max. speed 6 000 min -1 Protection(EN 60529) IP 65
Continuous max. speed 3 600 min -1 Torque (ring screw) nominal: 3N.m, break: 4N.m
Shaft seal Viton Theoretical mechanical lifetime 10 9 turns (F
axial
/ F
radial
)
Shocks (EN60068.2.27)  500 m.s -2 (during 6 ms) 25 N / 40 N : 140 50 N / 80 N : 17
Changes possible without further notice - Version 120105
BEI Sensors SAS
Espace Européen de l’Entreprise
9, rue de Copenhague
B.P. 70044 Schiltigheim
F 67013 Strasbourg Cedex
Tél : +33 (0)3 88 20 80 80
Fax : +33 (0)3 88 20 87 87
Mail : [email protected]
Web : www.beisensors.com