Brickcom OSD-200 20xp - Manual (Page 78)

74
M.E. is a standard mechanical operation. As the Dome Camera
tilts to the maximum angle, it will pan 180°, and then continue
tilting to keep tracking objects.
 Image Mode
IMAGE represents digital IMAGE FLIP, which enables users to
keep tracking objects seamlessly; under the mode, almost no
delay occurs in comparing with that under the M.E. mode.
E. Speed by Zoom
Enable this function to adjust the pan/tilt speed automatically by internal
algorithm when zooming. The larger zoom ratio leads to the lower
rotating speed. Click on button to save the setting.
F. ICR Function
With the IR cut filter, the camera can still catch clear image at night time
or in low light conditions.
 Auto
In the Auto mode, the internal circuit will automatically determine
whether to remove the IR cut filter according to the image
brightness level.
 On
Select the item to enable the IR cut filter.
 Off
Select the item to disable the IR cut filter.
9.11 Camera - Misc 2
(Miscellaneous Setup Menu 2)
The Miscellaneous Setting Menu 2 can be found under this path: PTZ>
Camera- Misc 2.