Brickcom OSD-200 20xp - Manual (Page 35)

31
C. Manage User
a. Delete user
To delete a user, select the user name that is wished like to delete
from the drop-down user list and then click on to remove it.
b. Edit user
Select a user name from the drop-down user list and click on to
edit the user’s password and privilege.
NOTE- It is required to enter the User password as well as select
the function open to the user. When finished, click on to
modify the account authority.
7.2.2 HTTPS
The HTTPS setting can be found under this path: System> Security>
HTTPS.
allows secure connections between the IP Camera and web
browser using or
Security (TLS)>, which ensure camera settings or Username / Password
info from snooping. It is required to install a self-signed certificate or a
CA-signed certificate for implementing .
To use HTTPS on the IP Camera, a HTTPS certificate must be installed.
The HTTPS certificate can be obtained by either creating and sending a
certificate request to a Certificate Authority (CA) or creating a self-signed
HTTPS certificate, as described below.
A. Create Self-signed Certificate
Before a CA-issued certificate is obtained, users can create and install
a self-signed certificate first.
Click on button unde
r “Create self-signed certificate” and
provide the requested information to install a self-signed certificate for
the IP Camera. Please refer to the last part of this section: Provide the
Certificate Information for more details.
NOTE- The self-signed certificate does not provide the same high
level of security as when using a CA-issued certificate.