Brickcom OSD-200 20xp User Manual
Page 31
27
Furthermore, after clicking the
shown as the figure below.
Pan & Tilt Direction Control- The Control> on the Control Panel allows users to control the Camera with browser viewers other than IE. Iris Control (Auto Iris / Iris+ / Iris-) - Click on the buttons (Auto Iris / Iris+ / Iris-) to adjust the Iris parameters. Zoom (Zoom In/ Zoom Out) - Click on the buttons to zoom in or zoom out. Focus (Auto Focus / Focus Near / Focus Far) - Click on the buttons to adjust the focus as near, far or automatic. e. Run Preset / Cruise / Sequence After setup the Preset / Cruise / Sequence lines according to PTZ Settings , select a Preset / Cruise / Sequence line and start it by clicking on the ( / / ). f. PT Speed (1~10) Set a number between 1 and 10 as the PT Speed every time users pan or tilt the Camera via the Pan & Tilt Direction Control Panel. 1 is the slowest, 10 is the fastest. g. Set Center Mode Right click on the Live Video Pane and select can position the interest area in the center of the Live Video Pane automatically by clicking on the point of interest. In