Security, User, 2 security – Brickcom OSD-200 20xp User Manual
Page 34
30
7.2 Security
The Security setting can be found under this path: System> Security.
Click the Security category, there will be a drop-down menu with tabs
including
7.2.1
User
The User setting can be found under this path: System> Security> User.
A. Admin Password
Change the a
dministrator’s password by inputting the new password in
both text boxes. The input characters/numbers will be displayed as dots
for security purposes. After clicking on
ask the Administrator for the new password for access. The maximum
length of the password is 14 digits.
NOTE-The following characters are valid: A-Z, a-z, 0-9, !#$%&
’-.@^_~.
B. Add user
Type the new user's name and password and click on
new user. Both user name and password can be up to 16 characters.
The new user will be displayed in the user name list. There is a
maximum of twenty user accounts. Each user can be assigned the
privileges of
a. I/O access
This item supports fundamental functions that enable users to view
video when accessing to the camera.
b. Camera control
This item allows the appointed User to change camera parameters on
the Camera Setting page.
c. Talk/Listen
Talk and Listen functions allow the appointed user in the local site (PC
site) communicating with, for instance, the administrator in the remote
site.