Brickcom OSD-200 20xp - Manual (Page 44)

40
Dynamic Domain Name System (DDNS) allows a host name to be constantly
synchronized with a dynamic IP address. In other words, it allows those using
a dynamic IP address to be associated to a static domain name so others
can connect to it by name.
A. Enable DDNS
Check the item to enable DDNS.
a. Provider
Select one DDNS host from the provider list.
b. Host name
Enter the registered domain name in the field.
c. Username/E-mail
Enter the username or e-mail required by the DDNS provider for
authentication.
d. Password/Key
Enter the password or key required by the DDNS provider for
authentication.
7.5 Mail
The Mail setting can be found under this path: System> Mail.
The Administrator can send an e-mail via Simple Mail Transfer Protocol
(SMTP) when an alarm is triggered. SMTP is a protocol for sending e-mail
messages between servers. SMTP is a relatively simple, text-based protocol,
where one or more recipients of a message are specified and the message
text is transferred.
Two sets of SMTP can be configured. Each set includes SMTP Server,
Account Name, Password and E-mail Address settings. For SMTP server,
contact the network service provider for more specific information.