Brickcom OSD-200 20xp - Manual (Page 33)

29
To enable DST, please check the item and then specify time offset and DST
duration. The format for time offset is [hh:mm:ss]; for instance, if the amount
of time offset is one hour, please enter “01:00:00” into the field.
D. Time format
Choose a time format (yyyy/mm/dd or dd/mm/yyyy) from the drop-down
menu. The time format for
“PC date” under and
“Date” under will be changed according to the selected format.
E. Sync with Computer Time
Select the item and video date and time display will synchronize with the
PC
’s.
NOTE- Users MUST click on the button to confirm the setting.
Otherwise the time will not be synced.
F. Manual
The Administrator can set video date, time and day manually. Entry format
should be identical with that shown next to the center field.
G. Sync with NTP Server
Network Time Protocol (NTP) is an alternate way to synchronize the
camera’s clock with a NTP server. Please specify the server that is wished
to synchronize in the center field. Then select an update interval from the
drop-down menu. For further information about NTP, please see the web
site: www.ntp.org .
NOTE- The synchronization will be done every time the camera boots
up.