Introduction, About this guide, Dxp hdmi series digital matrix switchers – Extron Electronics DXP HDMI User Manual
Page 7
DXP DVI, DXP DVI Pro, and DXP HDMI Series • Introduction
1
Introduction
This section gives an overview of the Extron DXP Series Digital Matrix Switchers,
describes significant features of the series, and provides application diagrams.
•
•
About the DXP DVI, DXP DVI Pro, and DXP HDMI Series Digital Matrix
Switchers
•
•
About this Guide
This guide contains installation, configuration, and operating information for the DXP
Series Digital Matrix Switchers, including the DXP DVI series, the DXP DVI Pro series, and
the DXP HDMI series.
The terms “DXP,“ “switcher,” and “DXP switcher” are used interchangeably in this guide to
refer to all DXP models. “DXP DVI” refers to the two DVI models (non-Pro), “DXP DVI Pro”
refers to the four DVI Pro models, and “DXP HDMI” refers to the four HDMI models.
About the DXP DVI, DXP DVI Pro, and DXP HDMI Series Digital Matrix
Switchers
The DXP DVI, DXP DVI Pro, and DXP HDMI series are high performance, digital matrix
switchers. The DVI and DVI Pro series route single link DVI-D signals (up to eight) and the
DXP HDMI series route HDMI signals from multiple sources to any DVI or HDMI-equipped
display devices. All DXP matrix switchers support resolutions of up to 1920x1200 and
HDTV 1080p/60.
The DVI Pro and HDMI models are HDCP compliant, enabling simultaneous distribution
of a single source signal to one or more compliant displays. (The DXP DVI series are not
HDCP compliant.)
The following matrix sizes are available:
DXP DVI Series (non-Pro):
•
DXP 44 DVI: 4 inputs by 4 outputs
•
DXP 88 DVI: 8 inputs by 8 outputs
DXP DVI Pro Series:
•
DXP 44 DVI Pro: 4 inputs by 4 outputs
•
DXP 48 DVI Pro: 4 inputs by 8 outputs
•
DXP 84 DVI Pro: 8 inputs by 4 outputs
•
DXP 88 DVI Pro: 8 inputs by 8 outputs