Extron Electronics DXP HDMI - Manual (Page 27)

DXP DVI, DXP DVI Pro, and DXP HDMI Series • Operation 21
3. Press and release the Input 5 button.
1 2 3 4 6 7 8
Press and release the Input 5 button.
The button lights
amber.
INPUTS
5
Figure 15. Select Input 5
4. Press and release the Output 3, Output 4, and Output 8 buttons.
1 2 5 6 7
PRESET ESC VIEW
CONTROL
Press and release the Output 3, Output 4, and Output 8 buttons.
The buttons blink
amber to indicate that the selected input will be
tied to these outputs.
The Enter button blinks
green to indicate the need to
confirm the change.
OUTPUTS
ENTER
3 4 8
Figure 16. Select the Outputs
NOTE: You can cancel the entire set of ties at this point by pressing and releasing
the Esc > button. The Esc > button blinks red once.
5. Press and release the Enter button.
ENTER
All input and output buttons
become unlit or return to
background illumination.
Press the Enter button to
confirm the configuration
change.
The Enter button
becomes unlit or returns to
background illumination.
Figure 17. Press Enter to Confirm the Tie
The configuration now is input 5 video and audio tied to output 3, output 4, and
output 8.
Figure 18. Example 1, Final Configuration