Sis commands for dxp, Symbol definitions for dxp – Extron Electronics DXP HDMI User Manual
Page 60
DXP DVI, DXP DVI Pro, and DXP HDMI Series • SIS Configuration and Control
54
SIS Commands for DXP
Symbol Definitions for DXP
]
= Carriage return and line feed
}
or
¦
= Carriage return (no line feed)
•
= Space
E
or W =
NOTE:
Input and output numbers in commands may be entered as either one-digit, two-
digit, or three-digit numbers. All input and output numbers are reported as two-digit
numbers in the response.
X!
= Input number
1 – maximum number of inputs for your model
X@
= Input number (for ties)
0 – maximum number of inputs for your model
(0 = untied)
X#
= Output number
1 – maximum number of outputs for your model
X$
= Lock mode, power,
0 = lock mode 0, not OK, or unmuted
supply or individual
1 = lock mode 1, OK, or muted
mute status
2 = lock mode 2
X%
= Group number (for I/O
1 through 4 groups
grouping)
0 = no group
X^
= Room number (for room
10 maximum. Each room can have up to 10 room
presets)
presets
(
X*
) assigned.
NOTE:
A room is a subset of operator-selected outputs that relate to each other. The DXP
switchers support up to 10 rooms, each of which can consist of from 1 to 16 outputs.
X&
= Global preset number
00 – 32 (00 = current configuration)
X*
= Room preset number
00 – current ties for the room in view mode, 10
maximum
NOTE:
A room preset is a stored configuration with all of the outputs assigned to a single
room. When a room preset is retrieved from memory, it becomes the current
configuration.
X(
= All video and audio mute
0 = no signals muted
status
1 = video muted
2 = audio muted
3 = video and audio muted
X1)
= HDCP status
0 = No input or output is connected.
1 = Input or output is connected and is not HDCP
compliant.
2 = Input or output is connected and is HDCP
compliant.
X1!
= Connection status
0 = no input connected
1 = input connected
X1#
= Name
12 characters maximum for input, output, and global
preset
names
11 characters maximum for room names
Upper- and lowercase letters are valid.
NOTE: The following characters are invalid or not recommended in the name:
{space}
~ , @ =
`
[ ] { } < > ‘ ’ “ ” ; : | \ +
and
?
X1$
= Total inputs
Total number of inputs for this switcher
X1%
= Total outputs
Total number of outputs for this switcher