Extron Electronics DXP HDMI - Manual (Page 117)

DXP DVI, DXP DVI Pro, and DXP HDMI Series • HTML Operation 111
Date/Time Settings Fields
The fields in the Date/Time Settings section provide a location for viewing and setting
the time functions.
Figure 108. Date/Time Settings Fields
Change the date and time settings as follows:
1. Click the drop-down box for the desired variable. The variables are month, day, year,
hours, minutes, am or pm, and (time) zone. A drop-list appears (the
Month list is
selected in figure 108).
2. Click and drag the slider or click the Scroll Up button or Scroll Down button
until the desired variable is visible.
3. Click on the desired variable.
NOTES: • If setting the time, set the local time, then select the offset from
Greenwich Mean Time (GMT) from the Zone menu.
• The Zone field identifies the standard time zone that has been selected
and displays the amount of time, in hours and minutes, that the local
time varies from the GMT international time reference.
4. Repeat steps 1 through 3 for other variables that need to be changed.
5. Select the appropriate daylight saving time radio button. To turn off daylight saving
time, select
Off (located to the left of the USA button).
NOTE: When daylight savings time is enabled, the switcher updates its internal
clock between standard time and daylight savings time in the spring
and fall on the date that the time change occurs in the United States of
America and parts of Europe and Brazil. When daylight savings time is
turned off, the switcher does not adjust its time reference.
6. Click the Submit button at the bottom of the Date/Time Settings section to implement
your selections.