Extron Electronics DXP HDMI - Manual (Page 29)

DXP DVI, DXP DVI Pro, and DXP HDMI Series • Operation 23
5. Press and release the Enter button.
ENTER
All input and output buttons
become unlit or return to
background illumination.
Press the Enter button to
confirm the configuration
change.
The Enter button
becomes unlit or returns to
background illumination.
Figure 23. Confirm the Tie
The configuration now is:
• Input 5 video tied to output 1, output 3, output 4, and output 8
• Input 5 audio tied to output 3, output 4, and output 8
Figure 24. Example 2, Final Configuration
Breaking Ties
To undo an existing I/O tie:
1. Press the I/O button (Video, Audio, or both) for the type of tie you want to break.
2. Press the input button whose tie you want to dissolve. The input button and its tied
output buttons light red, green, or amber, depending on your selection in step
1 and
on the types of ties the selected input currently has.
3. Press the desired lit output button. The selected output button and the Enter button
start to blink.
4. Press the Enter button. The selected input and output buttons and the Enter button
become unlit, and the tie is broken.
Example 3: Removing a Tie from a Set of Ties , on the next page, lets you practice
this procedure.