Bell & Gossett S14367B Technologic Constant Speed Pump Controller - Manual (Page 29)

Technologic ® Constant Speed Pump Controller Installation, Operation and Maintenance Manual 29
Setup Menu
4.7.5.5 Exercise Log
Path: Status Screens / Log (5) / Operation Menu (5) /
Exercise Log (5)
Pump # MM/DD HH:MM
Pump # MM/DD HH:MM
Pump # MM/DD HH:MM
Pump # MM/DD HH:MM
Each time a pump is exercised, the pump number
along with a date and time stamp will be logged. The
forty most recent exercises will be stored. The date is
displayed in MMDD format and the time in 24 hour
HHMM format. The most recent event is shown
first. Press UP/DOWN to view more log events. Press
CLEAR to exit.
4.7.5.6 Operating Hours
Path: Status Screens / Log (5) / Operation Menu (5) /
Operating Hours (6)
Operating Since
MM/DD/YY
Total Hours=#######
Press Clear to Exit
The six digit date is displayed in the MM/DD/YYYY
format. The total number of hours that the unit has
been in operation is also displayed. See section 4.7.7
to reset the total hours. Press CLEAR to exit.
4.7.6 Totals
Path: Status Screens / Log (5) / Totals (6)
Total KW-Hrs=#######
Total Flow=#########
Total KBTUs=########
OK? $ (Y/N)
When the system is started and in automatic operation,
the totals will be updated continuously. The total pump
energy is displayed in KW-Hrs. The total flow is dis-
played in gallons. The total thermal energy dissipated in
a system is continuously updated and is displayed in
thousands of BTUs. A flow meter is required to calculate
Total flow and KBTUs. KBTUs are only practical for
closed HVAC systems in which a differential tempera-
ture measured by the RTDs will reflect the heat dissipat-
ed in the system. See section 4.7.7 to reset these totals.
4.7.7 Reset Totals
Path: Status Screens / Log (5) / Reset Totals (7)
Reset Totals
Op Hrs? $ Power? $
BTUs? $
Flow? $ OK? $
See section 0 to view the totals that are logged. See
Table 41 for a description of the Reset Totals vari-
ables.
Variable Description
Operating Select Y to reset the total operating
Hrs hours
BTUs Select Y to reset the total BTUs
Flow Select Y to reset the total Flow
Power Select Y to reset the total Power
Table 41: Reset Totals Variables
4.7.8 Log Book
Path: Status Screens / Log (5) / Log Book (8)
#### MM/DD HH:MM
#### MM/DD HH:MM
#### MM/DD HH:MM
#### MM/DD HH:MM
The Log Book records events on the CPU. These
include power cycles, clearing the memory, changing
the time, and software or hardware faults. The forty
most recent CPU events will be stored. A four digit
numeric code for these events will be displayed along
with the date in MMDD format and the time in 24
hour HHMM format. The numeric codes are for fac-
tory use, and they may be requested by the factory
for troubleshooting purposes. The most recent events
are shown from top to bottom. Press UP/DOWN to
view more log events. Press CLEAR to exit.