C2G 52064 Single Port KVM over IP - Manual (Page 75)

Single Port KVM over IP
73 / 88
6.6.7 Event Log
Figure 6-33. Event Log
Important events like a login failure or a firmware update are logged to a selection
of logging destinations (see Figure 6-33). Each of those events belongs to an
event group, which can be activated separately.
The common way to log events is to use the internal log list of the IP-KVM switch.
To show the log list, click on “Event Log” on the “Maintenance” page. In the Event
Log Settings you can choose how many log entries are shown on each page.
Furthermore, you can clear the log file here.
List logging enabled
The common way to log events is to use the internal log list of the IP-KVM
switch . To show the log list, click on “Event Log” on the “Maintenance” page.
Since the IP-KVM switch's system memory is used to save all the information,
the maximum number of possible log list entries is restricted to 1.000 events.
Every entry that exceeds this limit overrides the oldest one, automatically.