C2G 52064 Single Port KVM over IP - Manual (Page 63)

Single Port KVM over IP
61 / 88
6.5.3 Video
Figure 6-23. Video Settings
Miscellaneous Video Settings
• Noise filter
This option defines how the IP-KVM switch reacts to small changes in the
video input signal. Turning on the noise filter can help reduce video flickering
that is often caused by distortions, as well as lowering unnecessary
bandwidth consumption. A large filter setting needs less network traffic and
leads to a faster video display, but small changes in some display regions
may not be recognized immediately. A small filter displays all changes
instantly but may lead to a constant amount of network traffic even if the
display content is not really changing (depending on the quality of the video
input signal). All in all the default setting should be suitable for most
situations.
• Force Composite Sync (Required for Sun Computers)
When connecting the device directly to legacy Sun computer (with
composite sync as the video output, it may be possible that IP-KVM don’t
recognize the composite sync automatically. To support signal
transmission from a Sun machine, enable this option. If not enabled the
picture of the remote console will not be visible.
To set the options, click on the button “Apply” .