C2G 52064 Single Port KVM over IP - Manual (Page 74)

Single Port KVM over IP
72 / 88
6.6.6 Date And Time
Figure 6-32. Date and Time
This link refers to a page, where the internal real-time clock of the IP-KVM switch
can be set up (see Figure 6-32). You have the possibility to adjust the clock
manually, or to use a NTP timeserver. Without a timeserver, your time setting will
not be persistent, so you have to adjust it again, after IP-KVM switch loses power
for more than a few minutes. To avoid this, you can use a NTP timeserver, which
sets up the internal clock automatically to the current UTC time. Because NTP
server time is always UTC, there is a setting that allows you to set up a static
offset to get your local time.
Warning
There is currently no way to adjust the daylight saving time automatically.
So you have to set up the UTC offset twice a year properly to the local
rules of your country.