C2G 52064 Single Port KVM over IP - Manual (Page 17)

Single Port KVM over IP
15 / 88
Using IP-KVM switch, administrators can determine which kind of serious hardware failure
has occurred (See table 2-1).
Type of failure Detected by
Hard disk failure Console screen, CMOS set-up information
Power cable detached, power supply
failure Server remains in power off state after power
on command has been given.
CPU Controller, main board failure. Power supply is on, but there is no video
output.
CPU fan failure By server specific management software
RAM failure Boot-Sequence on boot console
Table 2-1:Host system failures and how they are detected.