C2G 52064 Single Port KVM over IP - Manual (Page 46)

Single Port KVM over IP
44 / 88
Figure 6-9. Select Windows Share
The following information has to be given to mount the image properly:
Share host -- The server name or its IP address.
Share folder name -- The name of the share folder to be used.
Image file name -- The name of the image file on the share folder.
User name -- If necessary, specify the user name for the share named in advance.
If unspecified, and a guest account is activated, this guest
account information will be used as your login.
Password -- If necessary, specify the password for the given user name.
To register the specified file image and its location click on the button “Set”.
The specified image file is supposed to be accessible from the IP-KVM switch.
The information above has to be given from the point of view of the IP-KVM switch.
It is important to specify correct IP addresses, and device names. Otherwise,
IP-KVM switch may not be able to access the referenced image file.
Furthermore, the specified share has to be configured correctly. Therefore,
administrative permissions are required. As a regular user you may not have
these permissions. You should either login as a system administrator (or as “root”
on UNIX systems), or ask your system administrator for help to complete this task.
Windows 2000/XP
Open the Explorer, navigate to the directory (or share), and press the right
mouse button to open the context menu.