C2G 52064 Single Port KVM over IP - Manual (Page 57)

Single Port KVM over IP
55 / 88
Upon delivery, the account “super” has the password “pass”. Make sure to change
password immediately after you have installed and on initial access of your
IP-KVM switch.
Existing users
Select an existing user for modification. Once a user has been selected, click
the lookup button to see the user information.
New User name
The new user name for the selected account.
Password
The password for the login name. It must be at least three characters long.
Confirm password
Confirmation of the password above.
Email address
This is optional.
Mobile number
This information may be optionally provided.
Role
Each user can be a member of a group (named a “role” ) - either an
administrator, or an regular user. Choose the desired role from the selection
box.
To create an user press the button “Create”. The button “Modify” changes the dis-
played user settings. To delete an user press the button “Delete”.
Note:The IP-KVM is equipped with an host-independent processor and memory
unit which both have a limitation in terms of the processing instructions and
memory space. To guarantee an acceptable response time we recommend
not to exceed the num- ber of 25 users connected to the IP-KVM at the same
time. The memory space that is available onto the IP-KVM mainly depends on
the configuration and the usage of the IP-KVM (log file entries etc.). That’s
why we recommend not to store more than 150 user profiles.
6.5 KVM Settings
6.5.1 User Console
The following settings are user specific. That means, the super user can
customize these settings for every users separately. Changing the settings for one
user does not affect the settings for the other users.