C2G 52064 Single Port KVM over IP - Manual (Page 36)

Single Port KVM over IP
34 / 88
Figure 5-9. Remote Console Options Menu:Cursor
• Video Settings
Opens a panel for changing the IP-KVM switch video settings. IP-KVM
switch features two different dialogs, which for adjusting the video settings.
Video Settings through the HTML-Frontend
To enable local video port, select this option. This option decides if the
local video output of IP-KVM switch is active and passing through the
incoming signal from the host system.
The option Noise Filter defines how IP-KVM switch reacts to small
changes in the video input signal. Turning on the noise filter can help
reduce video flickering that is often caused by distortions, as well as
lowering unnecessary bandwidth consumption. A large filter setting
needs less network traffic and leads to a faster video display, but small
changes in some display regions may not be recognized immediately. A
small filter displays all changes instantly but may lead to a constant
amount of network traffic even if display content is not really changing
(depending on the quality of the video input signal). All in all the default
setting should be suitable for most situations.