C2G 52064 Single Port KVM over IP - Manual (Page 58)

Single Port KVM over IP
56 / 88
Figure 6-20. User Console Settings (Part 1)
User select box
This selection box displays the user ID for which the values are shown and for
which the changes will take effect. You may change the settings of other users
if you have the required privileges.
Transmission Encoding
The Transmission Encoding setting allows changing the image-encoding
algorithm that is used to transmit the video data to the Remote Console
window. It is possible to optimize the speed of the remote screen processing
depending on the number of users working at the same time and the network
bandwidth of the connection line (Modem, ISDN, DSL, LAN, etc.).
Automatic detection
The encoding and the compression level is determined automatically from
the available bandwidth and the current content of the video image.
Pre-configured
The pre-configured settings deliver the best result because of optimized
adjustment of compression and colour depth for the indicated network
speed.
Manually
Allows to adjust both compression rate and the colour depth individually.
Depending on the selected compression rate the data stream between the
IP-KVM switch and the Remote Console will be compressed in order to
save bandwidth. Since high compression rates consum more computing
power of IP-KVM switch, they should not be used while several users are
accessing the IP-KVM switch simultaneously.