GE Industrial Solutions AF-300 P11_G11 Ethernet Interface - Manual (Page 46)

Appendix C – Ethernet/IP Objects 40
Assembly Object (Class 0x04)
The Assembly object uses static assemblies. The assembly instance IDs used are in the vendor specific range.
Services
Class services Get Attribute Single
Instance services Get Attribute Single
Set Attribute Single
Class Attributes
# Access Name Type Value Description
1 Get Revision UINT 0x0002 Revision 2
2 Get Max Instance UINT 0x0096 The highest initiated instance number
Instance Attributes, Instance/Connection Point 0x03 (3d)
# Access Name Type Value Description
3 Get Data - - Heart beat instance
Instance Attributes, Instance/Connection Point 0x64 (100d)
# Access Name Type Value Description
3 Get Data ARRAY of
BYTES - Data produced by module
See “Appendix A - EGD, EtherNet/IP
IO Format”
Instance Attributes, Instance/Connection Point 0x65 (101d)
# Access Name Type Value Description
3 Get Data ARRAY of
BYTES - Contains the same data as in EGD
exchange P2.
Instance Attributes, Instance/Connection Point 0x96 (150d)
# Access Name Type Value Description
3 Set Data ARRAY of
BYTES - Data consumed by module
See “Appendix A - EGD, EtherNet/IP
IO Format”