GE Industrial Solutions AF-300 P11_G11 Ethernet Interface - Manual (Page 32)

Appendix A - EGD, EtherNet/IP IO Format 26
Data Produced by the Drive
Produced data is located in assembly instance 100 on EtherNet/IP and Consumed Exchange 1(C1) on EGD.
Position Description
Word 0 (16 Bit)
Operation status monitor 1
Word 1 (16 Bit) Operation status monitor 2
Word 2 (16 Bit) Output frequency monitor
Operation Status Monitor 1
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
- - WR RL ALM DEC ACC IL VL TL NUV BRK INT EXT REV FWD
FWD 1: In forward command
REV 1: In reverse command
EXT 1: In DC breaking or in preparatory excitation
INT 1: No output
BRK 1: In breaking
NUV 1: DC link voltage is establishment
(Under voltage condition at 0)
TL 1: In torque limiting
VL 1: In voltage limiting
IL 1: In current limiting
ACC 1: In acceleration
DEC 1: In deceleration
ALM 1: Alarm
RL 1: Remote (Run command or Frequency command is valid from link)
WR 1: Fieldbus writing right, 0: Keypad writing right
Operation Status Monitor 2
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
- - - - - - - - - - - - SWM2 RDY FDT FAR
FAR 1: Frequency (speed) arrival
FDT 1: Frequency (speed) detection
RDY 1: Ready for operation
SWM2 1: Motor 2 switching