GE Industrial Solutions AF-300 P11_G11 Ethernet Interface - Manual (Page 30)

EtherNet/IP 24
3. Click the button with the three dots in the MSG instruction to bring up the MESSAGE
configuration window. Do the following settings:
Field Value Description
Message Type CIP Generic CIP Message
Service Type Set attribute single CIP Service
Class 64 Fuji Vendor Specific Object
Instance 1 Instance 1
Attribute 8A E43 – LED Monitor (Function) = Communication No.
138 = 8A hex
Source
Element SetDisplayValue Name of created source tag
Source Length 2 1 word
Path OPCG11SETN Name of device. Click Browse and locate the module.
Must have been added as described in the IO
connection example chapter
When SetDisplay in the example is activated, the value in the SetDisplayValue Tag is written to parameter E43
in the drive.
Electronic Data Sheet (EDS) File
An EtherNet/IP node needs an EDS file with information about the device, the EDS file is used by network
configuration tools. The EDS file for this product is located on the diskette supplied together with the module
or can be downloaded from http://www.hms-networks.com/private/fujilogin.asp. Username: fuji, Password:
400024.