GE Industrial Solutions Galaxy Pulsar Edge - Manual (Page 108)

Galaxy Pulsar Edge Power System Controller
Issue 3 October 2011
108
TL1
The Pulsar Edge has the ability to interface using the TL1 protocol. This screen allows
the respective TL1 variables to be configured. A sample screen is below.
Programming
The Pulsar Edge has provides the ability to configure its alarms inputs as well as create
user defined events and derived channels. The inputs available depend on the shelf
configuration that the controller resides as well as the exact Pulsar Edge controller
configuration. Thus, not all systems have the same available inputs. The controller’s web
pages are configured to present the input and outputs that are available for the specific
controller and system it is configured. Following show some examples of the Auxiliary
input differences.
Auxiliary Alarm Inputs
This page provides the ability to configure the specific controller inputs. Clicking to Edit
associated alarm button, assign specific alarms to specific SNMP trap location, email
addresses, alarm relays (if present), and phone numbers. Following is a sample screen of
a CP841A_9C0R.