GE Industrial Solutions AF-650 GP General Purpose Drive (460_575_690V 125HP and above) - Manual (Page 8)

2 Safety Instructions and General Warning
Equipment containing electrical components may not be disposed of together with domestic waste.
It must be separately collected with electrical and electronic waste according to local and currently valid legislation.
Caution
The frequency converter DC link capacitors remain charged after power has been disconnected. To avoid electrical shock hazard, disconnect the frequency
converter from the mains before carrying out maintenance. Before doing service on the frequency converter wait at least the amount of time indicated
below:
380 - 500 V 90 - 200 kW 20 minutes
250 - 800 kW 40 minutes
525 - 690 V 37 - 315 kW 20 minutes
355 - 1000 kW 30 minutes
AF-650 GP
Operating Instructions
Software version: 4.9x
These Operating Instructions can be used for all AF-650 GP frequency converters with software version 4.9x.
The software version number can be seen from par. ID-43 Software Version.
2.1.1 High Voltage
The voltage of the frequency converter is dangerous whenever the frequency converter is connected to mains. Incorrect installation or oper-
ation of the motor or frequency converter may cause damage to the equipment, serious personal injury or death. The instructions in this
manual must consequently be observed, as well as applicable local and national rules and safety regulations.
AF-650 GP High Power Operating Instructions
7
2