Used by other devices, Firewire gauge, Info display – Universal Audio UAD POWERED PLUG-INS ver.6.1 User Manual
Page 83: Percentage from 100% and enter the
UAD Powered Plug-Ins Manual
- 83 -
Chapter 6: UAD Meter & Control Panel
Used by other
devices
This number displays the percentage of FireWire bus bandwidth that is used
by all the FireWire devices connected to the bus EXCEPT for UAD-2 Satellite,
such as hard drives and audio interfaces. The number is used to help deter-
mine an optimum value for the
parameter.
FireWire Gauge
) reflects the FireWire bus bandwidth cur-
rently used by UAD-2 Satellite and all other FireWire peripheral devices (e.g.,
audio interfaces and hard drives). The gauge graphically displays the
, the bandwidth used by active UAD-2 Satellite plug-ins,
and bandwidth used by all other devices on the bus. The FireWire Gauge in
the FireWire control panel is also displayed in the UAD Meter when UAD-2
Satellite is connected (see
).
The total range of the gauge is 100%, reflecting the total available bandwidth
of the FireWire bus. The
is displayed in green,
UAD usage is dynamically displayed in blue, and usage by all other devices
is displayed in orange. The sum of UAD and peripheral usage is also dis-
played as a percentage of the total available bandwidth.
Important:
FireWire bandwidth is unrelated to UAD DSP loads. See
“FireWire Bandwidth vs. UAD DSP” on page 143
Info Display
This area displays helpful text about parameters in the FireWire panel. Hover
the mouse over a FireWire setting to view the informational text.
Figure 14. Elements of the UAD FireWire Gauge
Total available Firewire bus bandwidth
Available FW bandwidth (headroom)
Total allocated
bandwidth
(UAD + other
devices)
Used by
other devices
(
orange
)
Used by
UAD (
blue
)
UAD Bandwidth Allocation
(blue + green)
Available for UAD
(
green
)