Universal Audio UAD POWERED PLUG-INS ver.6.1 - Manual (Page 356)

UAD Powered Plug-Ins Manual - 356 - Chapter 34: Neve 1081 Equalizer
High Band The high band delivers smooth high frequency shelving
or peak equalization. The inner knob controls the band
gain, and the outer ring selects the frequency or band
disable.
High Gain
The equalization gain for the high band is selected with
the inner knob of the dual-concentric control. Rotate the control clockwise to
add the famous high-end Neve sheen, or counter-clockwise to reduce the tre-
ble response. The available range is approximately ±18 dB.
High Frequency
The high band frequency is selected with the outer ring of the dual-concentric
knob controls. The ring control can be dragged with the mouse, or click di-
rectly on the “silkscreen” text to specify a frequency or disable the band.
Note: You can also click the shelving symbol above the knob to cycle through
the available values, or shift + click to step back one frequency.
The available high band center frequencies are 3.3 kHz, 4.7 kHz, 6.8 kHz,
10 kHz, 15 kHz, and OFF. When OFF is specified, the band is disabled.
UAD DSP usage is not reduced when the band is OFF.
High Peak Select
The High Peak button switches the high band from a shelving EQ to a
peaking EQ. The band is in shelf mode by default; it is in peak mode
when the button is “down” (darker).
High-Mid Band The high-midrange band delivers smooth high-mid
frequency peak equalization with a choice of two
bandwidths. The inner knob controls the band gain,
and the outer ring selects the frequency or band dis-
able.
High-Mid Gain
The equalization gain for the high-midrange band is selected with the inner
knob of the dual-concentric control. The available range is approximately
±18 dB.