Uad–xtenda, Multicard setup, Xtenda package contents – Universal Audio UAD POWERED PLUG-INS ver.6.1 User Manual
Page 120: Xtenda installation, Uad–xtenda information can be found on
UAD Powered Plug-Ins Manual
- 120 -
Chapter 10: UAD ExpressCard Products
UAD–Xtenda
UAD–Xtenda is an optional package that enables UAD-2 SOLO/Laptop and
UAD–Xpander to be used in a desktop computer that has PCIe expansion
slots. The UAD–Xtenda provides a convenient way to switch the same UAD
ExpressCard between desktop and notebook computers.
Note:
UAD-Xtenda is a discontinued product.
Multicard Setup
If a computer system has both PCI/PCI-X and/or PCIe slots, the UAD–1,
UAD–1e, and UAD ExpressCard products via UAD–Xtenda (or any combina-
tion thereof) can all be installed and used simultaneously as a multicard sys-
tem (four cards maximum). The UAD drivers and plug-ins are the same for the
UAD–1, UAD–1e, UAD-2 Solo/Duo/Quad, UAD-2 SOLO/Laptop, and
UAD–Xpander. See
Chapter 5, “Using Multiple UAD Devices”
formation.
Xtenda Package
Contents
The UAD–Xtenda package should contain the following items:
• UAD–Xtenda PCIe expansion card
• UAD Link Cable
Xtenda
Installation
Installing the UAD-Xtenda card uses the exact same procedures as UAD card
installation. Please see
“UAD Hardware Installation” on page 30
step-by-step procedures.
After the UAD software and UAD-Xtenda are installed, simply connect the
UAD ExpressCard to UAD–Xtenda as if the expansion slot were in a notebook
system. See the instructions for each product type in their respective sections
(