Tranny level, Lf sat led, Fatso jr. presets – Universal Audio UAD POWERED PLUG-INS ver.6.1 User Manual
Page 233: Webzine article, Control
UAD Powered Plug-Ins Manual
- 233 -
Chapter 18: Empirical Labs EL7 FATSO
Tranny Level
This control determines the amount of Tranny process-
ing (see
“The Tranny Processor” on page 223
for a de-
tailed description). Higher values make the Tranny ef-
fect more prominent. Increasing the Tranny level also
increases the signal THD (see
), and the sensitivity of the Warmth proces-
). A value of 5 is the unity setting.
Note:
This control has no effect when the Tranny processor is inactive (see
).
LF Sat LED
The LF Sat (Low Frequency Saturation) LED indicates the amount of LF satura-
tion in the Tranny processor. Higher Tranny Level values increase the LF satu-
ration.
FATSO Jr.
Presets
When loading presets created on the FATSO Jr. into the FATSO Sr., the pa-
rameters that are unique to FATSO Sr. are set to their default control values.
The default values of the unique FATSO Sr. parameters are: Thresh-
old/Tranny knobs at 5, and Filter/Attack/Release buttons off.
WebZine Article
An in-depth article with practical applications of the FATSO can be found in
the “Analog Obsession” article of the Universal Audio July 2009 Webzine:
•
All visual and aural references to the FATSO and all use of EMPIRICAL LABS’s trademarks are being
made with written permission from EMPIRICAL LABS. Special thanks to Dave Derr for assistance
with this project.
The Empirical Labs EL7 FATSO Jr. hardware unit