SENA STS Series - Manual (Page 94)

94
8.3. Supported Linux Utilities
8.3.1. Shell & Shell Utilities:
sh, ash, bash, echo, env, false, grep, more, sed, which, pwd
8.3.2. File And Disk Utils:
ls, cp, mv, rm, mkdir, rmdir, ln, mknod, chmod, touch, sync,
gunzip, gzip, zcat, tar, dd, df, du, find, cat, vi, tail,
mkdosfs, mke2fs, e2fsck, fsck, mount, umount, scp
8.3.3. System Utilities:
date, free, hostname, sleep, stty, uname, reset,
insmod, rmmod, lsmod, modprobe,
kill, killall, ps, halt, shutdown, poweroff, reboot, telinit, init,
useradd, userdel, usermod, whoami, who, passwd, id, su, who
8.3.4. Network Utilities:
ifconfig, iptables, route, telnet, ftp, ssh, ping
8.4. Accessing CLI As root Or System Administrator
Serial console:
1) Connect the console port of the STS Series with the PC serial port
2) Run the PC terminal emulation program
3) Configure the PC serial port to: 9600-8-N-1 No flow control
4) Press
5) Login with the STS Series root or admin account
Telnet console:
1) telnet STS Series_ip_address