SENA STS Series - Manual (Page 123)

123
Step 4. Enter IP address of Server(IP address of STS Series) and Port number (port number of
serial port #1) correctly and then select other parameters as follows.
Credentials = No Login Required,
Connection Protocol = Telnet,
Security = SSL Version 3 (SSLv3)
Figure A-14 Set parameters on Serial/IP Control Panel
Step 5. Open the terminal emulation program and select the corresponding COM port.
Then user can use the serial port of STS series using his local terminal emulation
program as if it is one of COM ports on his PC.