SENA STS Series - Manual (Page 82)

82
Figure 6-11 Transfer binary file by Zmodem (HyperTerminal)
--->9
Do you want to upgrade firmware? (y/n): y
Transfer firmware by zmodem using your terminal application.
To escape, press Ctrl+X
**B0ff000005b157
**B0ff000005b157
**B0ff000005b157
**B0ff000005b157
Firmware upgrade failed !
Now reboot ...
Figure 6-12 Firmware upgrade failure message
6.10. User File Uploading
User can upload his own file to the STS Series. But file uploading feature is only supported in console
menu. File uploading menu is located under “4. System administration --> 6. User file upload” of
console menu as shown on Figure 6-13.
To upload user file to the SS110/400/800 using console menu, user must use a TELNET/SSH or
terminal emulation program which supports Zmodem transfer protocol.
Uploading procedure is similar to firmware upgrade using console menu as follows,