SENA STS Series - Manual (Page 66)

66
 SNMP trap version
This parameter set a version of SNMP trap, which will be sent when pre-defined keyword is detected.
[Status event edit]
 Device connection/disconnection
Fill in the check boxes of the preferred actions that are to be taken on the event of serial device
connection or disconnection.
 TCP connection/disconnection
Fill in the check boxes of the preferred actions that are to be taken on the event of TCP connection or
disconnection from remote hosts.
[Keyword list edit]
 Action on key word
User can select “Add” or “Remove” for the action on keyword selected.
 Keyword string
User can specify any word, which he/she wants to set as a keyword.
 Email notification
User can select enable or disable for the Email notification action on keyword selected.
 SNMP trap notification
User can select enable or disable for the SNMP trap notification action on keyword selected.
 Port command
User can select enable or disable for the port command action on keyword selected.
 Port command string
STS Series supports direct reaction to a device attached to serial port when pre-defined keyword is
detected. User can specify command or string, which will be sent to a serial port on this menu.