SENA STS Series - Manual (Page 91)

91
 RtoMax :
Specifies the maximum retransmission time-out value in milliseconds.
 MaxConn :
Specifies the maximum number of connections. If is the maximum number is set to -1, the maximum
number of connections are dynamic.
 ActiveOpens :
Specifies the number of active opens. In an active open, the client is initiating a connection with the
server.
 PassiveOpens :
Specifies the number of passive opens. In a passive open, the server is listening for a connection
request from a client.
 AttemptFails :
Specifies the number of failed connection attempts.
 EstabResets :
Specifies the number of established connections that have been reset.
 CurrEstab :
Specifies the number of currently established connections.
 InSegs :
Specifies the number of segments received.
 OutSegs :
Specifies the number of segments transmitted. This number does not include retransmitted segments.
 RetransSegs :
Specifies the number of segments retransmitted.
 RetransSegs :
Specifies the number of errors received.
 OutRsts :
Specifies the number of segments transmitted with the reset flag set.