SENA STS Series - Manual (Page 38)

38
Enable/Disable Email notification
Title of Email
Email
notification
Recipient’s Email address
Enable/Disable SNMP notification
Title of SNMP trap
SNMP trap receiver’s IP address
SNMP trap community
SNMP
notification
SNMP trap version
Add/Edit a keyword
Keyword string
Email notification
SNMP trap notification
Port command
Remove a keyword
Figure 4-1 shows the web-based serial port configuration screen. This serial port configuration main
screen summarizes port information. In this summary page, user can find how host mode, encryption
option, local port number and serial port parameters are configured at a time. In this page, the
meaning of string on Host mode column is as follows,
Description
Host mode
Mode
5
Encryption
6
Telnet
7
TCP TCP Disabled Disabled
TCPs TCP Enabled Disabled
TEL TCP Disabled Enabled
TELs TCP Enabled Enabled
UDP UDP *
8
*
Modem
Emulation
Modem Emulation * *
To select and configure a serial port individually, click the port number or title. To configure all of
the serial ports at once, click [All] or [Port Title], located below the [All port configuration] label.
5
See section 4.2.4 Host Mode Configuration
6
See section 4.2.7 Cryptography Configuration
7
See section 4.2.4.1 TCP Mode
8
Not support